Service manual

Encore — Configuration Manual 165

Sample Router Configurations

RGB and Key as Two Levels and Two Crosspoint Groups

This example is for two Levels (RGB and Key) with the RGB Level con-

taining 3 elements (R, G and B) and the Key Level containing one element.

The R and G elements are mapped onto one Crosspoint Group. The B

element and the key Level is mapped onto a second Crosspoint Group.

Figure 101. RGB and Key as Two Levels and Two Crosspoint Groups

A Source (or Destination) Level mapped to the RGB logical matrix is con-

figured with a connector in the range 1 to 32. The R element uses the first

Crosspoint Group with the configured crosspoint (1 to 32). The second

element (G) automatically uses the first Crosspoint Group with crosspoints

in the range 33 to 64 (configured crosspoint + 32). The third element (B)

automatically uses the second Crosspoint Group with crosspoints in the

range 1 to 32 (configured crosspoint). The Key logical matrix is on another

Level with a single element. Sources or Destination Levels mapped to the

Key logical matrix uses connectors in the range 33 to 64 on the second Cros

spoint Group.

Multi-drop Serial Communications

This example is as described above.

Crosspoint GroupI/O ChannelsLogical Matrices

RGB

32x32 Matrix

Connector ID 1-32

Three Elements

Blocked Format

Key

32x32 Matrix

Connector ID 33-64

One Element

Blocked Format

132