Service manual

164 Encore — Configuration Manual
Section 5 — Router Configuration
Independent Serial Communications
This example is similar to Multi-drop Serial Communications above but uses
two independent I/O channels, one to each of the Crosspoint Groups.
Logical matrices AES1 and AES2 use the first I/O channel and the first
Crosspoint Group. Logical matrices AES3 and AES4 use the second I/O
channel and the second Crosspoint Group.
Table 19. Configuration for Four Levels and Two Crosspoint Groups (Interleaved)
Crosspoint Group
Matrix Controllers
within Crosspoint
Group
Segments within Crosspoint Group Logical Matrix
Name Max Input Max Output Matrix Controllers Segments Matrix Controller I/O Channel
a
a
S = Same for both crosspoint groups; D = Different for each crosspoint group; A = Any channel.
Address
a
Outputs ID Input range Output range Type & Factor Unique Name Level Inter levels Elements
Multi-drop Serial
Communications
AES_12Phys 64 64 1 2 1
S D
Xpt
Group
1 1-63 1-63
Interleave
Factor 2
Yes AES1 AES1 None 1
2 2-64 2-64
Interleave
Factor 2
Yes AES2 AES2 None 1
AES_34Phys 64 64 1 2 1
Xpt
Group
3 1-63 1-63
Interleave
Factor 2
Yes AES3 AES3 None 1
4 2-64 2-64
Interleave
Factor 2
Yes AES4 AES4 None 1
Independent Serial
Communications
AES_12Phys 64 64 1 2 1
D A
Xpt
Group
1 1-63 1-63
Interleave
Factor 2
Yes AES1 AES1 None 1
2 2-64 2-64
Interleave
Factor 2
Yes AES2 AES2 None 1
AES_34Phys 64 64 1 2 1
Xpt
Group
3 1-63 1-63
Interleave
Factor 2
Yes AES3 AES3 None 1
4 2-64 2-64
Interleave
Factor 2
Yes AES4 AES4 None 1