Service manual

Encore — Configuration Manual 163
Sample Router Configurations
Four Levels and Two Crosspoint Groups (Interleaved)
This example is for four Levels (AES 1, AES 2, AES 3 and AES 4) each con-
taining a single element. AES 1 and AES 2 are mapped to the same Cros-
spoint Group. AES 3 and AES 4are mapped to a second Crosspoint Group.
The logical matrices use interleaved format.
Figure 100. Four Levels and Two Crosspoint Groups (Interleaved)
Source (or Destination) Levels are independently mapped to the four
logical matrices (AES1, AES2, AES3 or AES4) on the appropriate Level.
Logical matrix AES1 uses the first Crosspoint Group with odd connectors
in the range 1 to 63 (total of 32 connectors). Logical matrix AES2 uses the
first Crosspoint Group with even connectors in the range 2 to 64. Logical
matrix AES3 uses the second Crosspoint Group with odd connectors in the
range 1 to 63. Logical matrix AES4 uses the second Crosspoint Group with
even connectors in the range 2 to 64.
Multi-drop Serial Communications
This example is as described above.
Crosspoint GroupI/O ChannelsLogical Matrices
AES2
32x32 Matrix
Connector ID 2-64
One Element
Interleaved Format
with a factor of 2
AES3
32x32 Matrix
Connector ID 1-63
One Element
Interleaved Format
with a factor of 2
AES4
32x32 Matrix
Connector ID 2-64
One Element
Interleaved Format
with a factor of 2
AES1
32x32 Matrix
Connector ID 1-63
One Element
Interleaved Format
with a factor of 2
132
32
64
64
1 & 2
132
32
64
64
3 & 4