Service manual

Encore — Configuration Manual 161
Sample Router Configurations
Four Levels and Two Crosspoint Group (Blocked)
This example is for four Levels (AES 1, AES 2, AES 3 and AES 4) each con-
taining a single element. AES 1 and AES 2 are mapped to the same Cros-
spoint Group. AES 3 and AES 4are mapped to a second Crosspoint Group.
The logical matrices use blocked format.
Figure 99. Four Levels and Two Crosspoint Group (Blocked)
Source (or Destination) Levels are independently mapped to the four
logical matrices (AES1, AES2, AES3 or AES4) on the appropriate Level.
Logical matrix AES1 uses the first Crosspoint Group with connectors in the
range 1 to 32. Logical matrix AES2 uses the first Crosspoint Group with
connectors in the range 33 to 64. Logical matrix AES3 uses the second Cros
-
spoint Group with connectors in the range 1 to 32. Logical matrix AES4
uses the second Crosspoint Group with connectors in the range 33 to 64.
Multi-drop Serial Communications
This example is as described above.
Crosspoint GroupI/O ChannelsLogical Matrices
132
32
64
64
1
2
132
32
64
64
3
4
AES2
32x32 Matrix
Connector ID 33-64
One Element
Blocked Format
AES3
32x32 Matrix
Connector ID 1-32
One Element
Blocked Format
AES4
32x32 Matrix
Connector ID 33-64
One Element
Blocked Format
AES1
32x32 Matrix
Connector ID 1-32
One Element
Blocked Format