Service manual

Encore — Configuration Manual 157

Sample Router Configurations

Four Elements in Two Crosspoint Group (Blocked)

This example is for one Level (AES 1 - 4) containing 4 elements (AES 1, AES

2, AES 3 and AES 4) which is mapped into two Crosspoint Groups and uses

blocked format. Multi-dropped serial communications are used.

Figure 97. Four Elements in Two Crosspoint Group (Blocked)

A Source (or Destination) Level mapped to the AES1_4 logical matrix (on

the AES 1 - 4 Level) is configured with a connector in the range 1 to 32. The

AES 1 element uses the first Crosspoint Group with the configured cros

spoint (1 to 32). The second element (AES 2) automatically uses the first

Crosspoint Group with crosspoints in the range 33 to 64 (configured cros

spoint + 32). The third element (AES 3) automatically uses the second Cros-

spoint Group with crosspoints in the range 1 to 32 (configured crosspoint).

The fourth element (AES 4) automatically uses the second Crosspoint

Group with crosspoints in the range 33 to 64 (configured crosspoint + 32).

Multi-drop Serial Communications

This example is as described above.

Crosspoint GroupI/O ChannelsLogical Matrices

AES1_4

32x32 Matrix

Connector ID 1-32

Four Elements

Blocked Format

132