Service manual

Encore — Configuration Manual 149
Sample Router Configurations
Two Levels in Two Crosspoint Groups (Multi-Dropped)
This example is for two audio Levels (Audio Left and Audio Right)
mapped into separate Crosspoint Groups using multi-dropped serial com
-
munications. The Router Controller cannot carry out inter-level routing as
the Crosspoint Group is not common.
Figure 89. Two Levels in Two Crosspoint Groups (Multi-Dropped)
Table 8. Configuration for Two Levels in Two Crosspoint Groups (Multi-Dropped)
Crosspoint Group
Matrix Controllers
within Crosspoint
Group
Segments within Crosspoint Group Logical Matrix
Name Max Input Max Output Matrix Controllers Segments Matrix Controller I/O Channel
a
a
S = Same for both crosspoint groups; D = Different for each crosspoint group; A = Any channel.
Address
a
Outputs ID Input range Output range Type & Factor Unique Name Level Inter levels Elements
Audio_L_phys 32 32 1 1 1
S D
Xpt
Group
L 1-32 1-32 Block Yes Audio_Left
Audio
Left
None 1
Audio_R_phys 32 32 1 1 1
Xpt
Group
R 1-32 1-32 Block Yes Audio_Right
Audio
Right
None 1
Crosspoint Group
132
32
L
132
32
R
I/O ChannelsLogical Matrices
Audio_Stereo
32x32 Matrix
Connector ID 1-32
Two Elements