Service manual

148 Encore — Configuration Manual
Section 5 — Router Configuration
Sample Router Configurations
Two Levels in One Blocked Crosspoint Group
This example is for two audio Levels (Audio Left and Audio Right)
mapped into one Crosspoint Group. The Router Controller cannot carry
out inter-level routing.
Figure 88. Two Levels in One Blocked Crosspoint Group
Table 7. Configuration for Two Levels in One Blocked Crosspoint Group
Crosspoint Group
Matrix Controllers
within Crosspoint
Group
Segments within Crosspoint Group Logical Matrix
Name Max Input Max Output Matrix Controllers Segments Matrix Controller I/O Channel
a
a
S = Same for both crosspoint groups; D = Different for each crosspoint group; A = Any channel.
Address
a
Outputs ID Input range Output range Type & Factor Unique Name Level Inter levels Elements
Audio_phys 64 64 1 2 1 A A
Xpt
Group
L 1-32 1-32 Block Yes Audio_Left
Audio
Left
None 1
R 33-64 33-64 Block Yes Audio_Right
Audio
Right
None 1
132
32
64
64
Crosspoint Group
L
R
I/O ChannelsLogical Matrices
Audio_Left
32x32 Matrix
Connector ID 1-32
Blocked Format
Audio_Right
32x32 Matrix
Connector ID 33-64
Blocked Format