Service manual

144 Encore — Configuration Manual
Section 5 — Router Configuration
Creating and Defining a Rule
1. Click the Add Rule button.
2. Click the Select button to select the rule that you created in Step 1 – it
will be the last (un-named) rule in the list window that appears on the
screen.
3. Click the Name Rule button to give the rule a meaningful name using the
alpha/numeric keyboard that appears on the screen.
4. Click a Source name in the Source Names column to toggle the status of
that Source so it shows either
Available or Inhibited. Choose Available or
Inhibited, depending on whether you want to allow the Source to be
routed or not if this rule is applied.
Select
Allows a pre-configured rule to be selected in the list
window which appears.
Copy Rule
Displays a list of rules from which you can select one and
copy its settings over the currently displayed rule.
Name Rule
Allows the name of the currently displayed rule to be
changed.
Add Rule
Adds a new unnamed rule to the list of rules.
Delete Rule
Enables one or more rules, selected in the list window, to
be deleted.
List
Displays a list of Destinations that obey the rule currently
displayed on the screen.
Add
Allows the user to select more Destinations that are to
obey the rule currently displayed on the screen.
Remove
Allows one or more Destinations, selected in the list
window, to be removed from the list of Destinations that
obey the currently displayed rule.
Clicking on the time readout on the upper right hides or displays the Menu bar.
Inhibit All
Sets the status of all Sources to Inhibit for the currently dis-
played rule.
Allow All
Sets the status for all Sources to Available for the currently
displayed rule.