Service manual

138 Encore — Configuration Manual
Section 5 — Router Configuration
Destinations
A Destination is configured to contain one or more outputs, with each one
residing in a different Logical Matrix. A single output can’t be assigned to
more than one Destination. Configuring the Destination associates specific
outputs (Physical Matrix connections) to the Destination name; selecting a
Destination name also selects the associated outputs.
Destination Configuration Screen
This screen enables all Destinations that can be controlled by the Router
Control application to be configured.
Figure 81. Destination Configuration Screen
Dest.
Allows a Destination to be selected by number from the
router database.
ID
Short form name for a Destination. This is the name dis-
played by default on the Control Panels and in the Local
Router Panel. Do not leave this field blank.
Up Down Arrows
Moves the list of Destinations up or down one Destina-
tion per click.
Dest Notes
Allows annotations for the selected Destination.
Name
Allows a long form name to be given to a Destination.