Service manual

Encore — Configuration Manual 137
Logical Matrix Configuration Screen Description
50. Repeat Step 47 through Step 49 until you’ve configured all necessary
Levels for that Source.
• A green indicator next to the name of a Level in the Levels section
confirms that the Level will be routed from the currently selected
Source.
• A yellow light indicates that attributes are available for a Level.
• A red light indicates that the crosspoint is invalid. Check the matrix
configuration for errors and, once corrected, click the
Config. button
on the Main menu to return to the System Configure screen and
click the
Re-Sync Comms button.
51. With the first Source configured, you now need to configure all the
remaining Sources for the router matrix. The buttons on the Menu bar
on the right of the screen can be used to aid the configuration process.
•Use the Copy & Inc button to copy the current Source settings and
then increment the values shown opposite the
Source, ID, Name, Alias,
and
Type buttons. This saves time and repetition when configuring
many Sources that form a logical list. Sources can then be renamed
more easily in the Names screen.
•Use the New Src button to select the first Source number in the router
database that does not have a name assigned to it.
•Use the Select Src button to amend a previously configured Source.
The list window that appears (
Figure 80) allows selection by name
or number.
Figure 80. Select Source Screen