Service manual

Encore — Configuration Manual 135
Logical Matrix Configuration Screen Description
Configuring a Source
The following procedures continue from Configuring a Logical Matrix on
page 131, but can be used to configure Sources at any time.
40. Click the Source button on the Main menu to go to the Source Configure
screen.
41. Click the Source button at the top of the Source Configure screen and
enter the number of the new Source. (Alternatively you can use the
arrow buttons to scroll through the Sources until you reach the desired
number.)
Note This number will be the logical (index) number for the Source in the router
database.
42. Click the ID button to give the Source a unique and meaningful identity
(maximum 8 characters) that appears on the control panel.
This can be regarded as a short form name for the Source.
43. If you wish, click the Source Notes button to add details and other
annotations about this Source.
Figure 78. Source Notes screen
Note Remember to click the return icon in the screen before exiting it or your
changes will be lost.
44. Click the Name button to give the Source a longer, more meaningful
name (maximum 16 characters). This can be regarded as a long form
name for the Source.
Multi New
Allows the automatic creation of multiple Sources, similar
to Copy & Inc, except the number of items to be created is
specified and then created with one button press.