Service manual

128 Encore — Configuration Manual
Section 5 — Router Configuration
Point Group section of the screen. See the button descriptions for the
functions of these buttons.
If you specified more than one Segment in the No. Segments field, follow
the steps in
To Configure Additional Segments, before returning to Step 30.
30. Click the Config. button in the Main menu to return to the System
Configure screen.
31. Click the Re-Sync Comms button in the Hardware section of the screen to
create the data structures you’ve defined during this procedure.
32. While you’re here, and after you’ve completed Step 31, click the Save
button to save your growing configuration back to the sharer.
To Configure Additional Segments
If you’ve specified more than one Segment, follow these steps after creating
and configuring the first one.
a. In the Segment section of the Physical Matrix Configuration screen,
use one of the
Segment ID button controls to select the next Segment
you want to configure.
b. Type the appropriate input and output ranges for the selected
Segment in the
First Input, Last Input, First Output, and Last Output fields.
c. Change any other settings as required in the Segment section.
d. Repeat Step a and Step c for all other Segments you specified.
e. Go back to Step 30 to complete this portion of the configuration.