Service manual
Encore — Configuration Manual 119
Physical Matrix Screen Description
Outputs
Allows entry of the number of outputs for the selected
controller.
Toggles hardware locking on/off. Hardware Lock locks
crosspoints on a matrix. This button appears and this
feature is available only if the protocol specified for the
selected channel supports Hardware Lock.
NOTE: Matrices using the GVG NP (Name or Index) or
Dummy Matrix protocol that have tie-lines should
disable the
Hardware Lock flag. This helps prevent possible
tie-line connection failures.
Net Name
Displays the IP address of the matrix to be controlled by
the selected channel. This is pertinent and can be edited
only if a channel uses a protocol (such as GVG CPL) that
uses a network interface for control.
Controller
Attributes
If the controller selected in the Controller No field is a Con-
certo matrix, this button opens the Attribute Configura-
tion screen where you can specify, modify, or view
settings for the unit’s board slots. Every populated slot
must be correctly specified using the drop down menu
which appears when you click in a slot field.