Service manual

Encore — Configuration Manual 117
Physical Matrix Screen Description
Figure 73. Physical Matrix Configuration Screen
Name
Displays the name of the selected Crosspoint Group. Also
allows a Crosspoint Group to be selected, named, or
renamed. See
Crosspoint Groups on page 121 for a defini-
tion and explanation of Crosspoint Groups.
No. Inputs
Allows the number of inputs to be defined for a particular
Crosspoint Group.
No. Outputs
Allows the number of outputs to be defined for a partic-
ular Crosspoint Group.
Loop Back
indicator
Indicates whether loop back functionality is enabled.
Once enabled, no information is sent to the matrix. This
allows the simulation of system operation without having
a physical matrix connected. GVG CPL supports this
mode. The Dummy Matrix protocol only supports Loop
Back.
No. Controllers
Allows the number of controllers to be defined for a par-
ticular Crosspoint Group. Limit is 32.
No. Segments
Allows the number of Segments to be defined for a partic-
ular Crosspoint Group. Limit is eight.