Service manual
112 Encore — Configuration Manual
Section 5 — Router Configuration
Figure 69. Select Level Format Window
9. Click the Commit Changes button to apply your changes to the network.
Note Any changes made on the Levels Configuration Screen are implemented
system-wide, including across all Areas, and affect all users.
10. Click the Config or Main Menu button to leave the Level Config screen.
To continue with a new configuration, proceed directly to I/O Channel
Configuration.
Configuring a Communication Channel on page 115, or read
the intervening explanatory material first.
Channels Screen Description
Before you can configure your router, you must define and select a commu-
nication channel by which the router will communicate with each matrix to
be controlled. To do so, make your settings using the I/O Channel Config
-
uration screen (Figure 70).
Note If you change an existing I/O Channel configuration, you must click the Re-
Sync Comms button to activate the changes.