Service manual

Encore — Configuration Manual 111
Level Screen Description
The character in parenthesis after the Level name on a button, for example:
SDI (D), is intended to help users remember what format that Level sup-
ports.
Configuring a Level
The following procedures continue from Creating a New Router Configura-
tion on page 108, but can be used to configure Levels at any time.
6. Select a Level by clicking the appropriate indicator button in the Levels
section of the screen.
The indicator will turn green to indicate that Level is selected.
7. Click the Set Label button in the Config Level section of the screen, and
type a name for the Level using the alpha/numeric keyboard that
appears on the screen.
Figure 68. Level Label Keyboard
8. Click the Set Format button in the Config Level section of the screen, and
select a type for the Level from the list window that appears on the
screen.
Table 6. Level Label Characters and Their Formats
Char. Format Char. Format
* Any Format K Key
A An AudioL - Analog Audio Left Channel O Other - Not Specified
B An AudioR - Analog Audio Right Channel ? Reserved
C Component - Component Video R Data or Serial Data
D Dig Video - Digital Video (SDI/SDV) S An Audio St - Analog Audio Stereo
E SDI+Audio T Timecode
G Dig Audio - Digital Audio or AES V Composite - Composite Video