Service manual

Encore — Configuration Manual 109
Level Screen Description
CAUTION The next step erases the database saved on) the Sharer.
4. Click the Save button to save a null database to Sharer.
5. Define the maximum number of Sources and Destinations by typing in
the
Max Src and Max Dst fields.
This establishes the number of Source and Destination index numbers
that will be used in the configuration. These numbers can be modified
after the fact. Increasing the numbers will not affect any previously
entered data.
Note Reducing the numbers will remove Source and Destination data outside of
the new range you enter.
Because Levels are global, you should create them first. To continue with a
new configuration, proceed directly to
Configuring a Level on page 111.
Level Screen Description
Levels generally correspond to signal formats, for example, audio, digital
video, etc. The name and type of each Level is configured on this screen.
Changes made here apply to all routers in all Areas of an Encore system
because Levels are global.
Click on the Level button to go to the Level Configuration screen (Figure 67).