Service manual

Encore — Configuration Manual 107
System Configure Screen Description
Import
Imports a CSV (comma separated values) file from the
directory you choose on the drive you specify in the sub
-
sequent screens: the floppy disk (fd0) or the primary hard
disk (hd0) on the controller or the floppy drive (IP
number//fd0) or the primary hard disk (IP number//hd0)
of the workstation running the OUI. Importing a CSV file
containing Source and Destination information is an
alternative way of quickly configuring the Router Con
-
troller. See Configuration Export and Import on page 170 for
details.
Export
Exports the current router database settings as a CSV
(comma separated values) file to the target and path you
choose when you click the Path button: either to the PC’s
floppy disk (fd0) or to the PC’s primary hard disk (hd0).
These exported settings can then be used to configure
other Router Controllers. This is also an effective way to
back up the router configuration. See
Configuration Export
and Import on page 170 for details.
Re-Sync Comms
Re-initiates all matrix communications. This button must
be clicked to apply changes to I/O channel settings and
for other communication-related changes. This button is
colored red when changes have been made.
Re-Sync Router
The Router Control application synchronizes itself to the
physical state of the router matrices that it is controlling.
Re-Sync
Matrices
The Router Control application sends the last saved state
of the router Crosspoint status map to all of the router
matrices that it is controlling.
TimeCode
Opens the Timecode Status window which displays time
in the form: hours:minutes:seconds:frame. The
VITC
Present
indicator lights when VITC is embedded on the
reference input. The Encore system automatically detects
the incoming reference signal format, and its setting
cannot be changed
.