Service manual

104 Encore — Configuration Manual
Section 5 — Router Configuration
Figure 66. System Configure Screen
Build
Reports the software version of the Router Control appli-
cation. Cannot be changed by user.
Change Area
Alias
Enables you to change the Area’s alias (maximum 3 char-
acters), not its name. This alias is used by the Local Router
Panel
and other router clients such as the Panel Server. The
actual name of the Area, (also shown on this button), is
defined in the System Manager application.
Area
Click this button to change to a different Area. Many facil-
ities will only have one Area, though larger facilities may
have several. New Areas are created using System Man
-
ager.
Path
Displays the configuration file path for the router data-
base. Cannot be changed by user. If filing mode is Local,
the path is on the System Controller. If filing mode is
Sharer, the path is on the Sharer PC.
Mode
Displays the mirroring mode. Click the button for a list of
mirroring options: Disabled, Mirror Master, Mirror Slave,
or Asymmetric Slave.
IP
In this field, specify the IP address of the device which
will mirror this Router Controller.