Installation guide

VSR-1200™ and RDU™ Installation and Quick Configuration Guide Page 17
3 Do one of the following:
a To modify an entry, type m. Go to Step 4.
b To copy an entry, type c. Go to Step 5.
c To add an entry to the bottom of the list, type a. Go to Step 6.
d To add (insert) an entry at a specified point in the list, type i. Go to Step 7.
e To delete an entry, type d. Go to Step 8.
f To return to the Virtual Private Network Configuration menu, press the Escape key
twice.
❖ The Virtual Private Network Configuration menu appears. Go to Section 2.5.4,
Virtual Private Network Connections.
4 Do one of the following:
a To modify an entry, do all of the following:
• Type the line number of the entry you wish to modify.
❖ The entry’s list of values appears.
• Select the field you wish to change.
❖ The possible values for the field are listed.
• Select the new value for the field.
❖ The new value is accepted, and the entry’s list of values appears again.
b To return to the IP/VPN Policy Table, press the Escape key.
❖ A prompt asks whether you wish to save the changes you made.
c Answer yes (or no, if you decide not to keep the changes).
❖ The IP/VPN Policy Table appears. Return to Step 3.
Source Src Destination Dest Protocol
# Address Port Address Port /Flag Path Name I/O Action
--- --------------- ------ --------------- ------ -------- ---------- --- ------
1 10.5.6.0 * 172.23.9.0 * * * *
10.5.6.255 * 172.23.9.255 *
Tunnel To Remote 1 Action: Initiate VPN Profile: Remote
2 * * * * * * *
* * * *
Allow ALL Action: Allow
Add, Modify, Insert, Copy or Delete an Entry? - (A/M/I/C/D) : a