- Encore Microcontroller Development User Manual

Z8 Encore!
®
Flash Microcontroller Development Kit
User Manual
20
UM014605-0208 Z8 Encore!® Evaluation Board
47 PD3 Port D, bit 3 IN/OUT
48 PC3 Port C, bit 3 IN/OUT SCK
49 PD2 Port D, bit 2 IN/OUT
50 PC2 Port C, bit 2 IN/OUT SS
51 PD1 Port D, bit 1 IN/OUT T3OUT
52 PC0 Port C, bit 0 IN/OUT T1IN
53 PD0 Port D, bit 0 IN/OUT T3IN
54 PC1 Port C, bit 1 IN/OUT T1OUT
55 GND
56 GND
57 GND
58 GND
59 GND
60 GND
Table 6. Header J8
Pin No Signal Name Function Direction Comments
1VDD
2GND
3 PB0 Port B, bit 0 IN ALG0 Analog input
4 PB1 Port B, bit 1 IN ALG1 Analog input
5 PB2 Port B, bit 2 IN ALG2 Analog input
6 PB3 Port B, bit 3 IN ALG3 Analog input
Note: Do not use pins marked Reserved when designing Expansion Modules.
All the signals are driven directly by the MCU.
Table 5. Header J6 (Continued)
Pin No Signal Name Function Direction Comments
Note: Do not use pins marked Reserved when designing Expansion Modules.
All the signals are driven directly by the MCU.