- Encore Electronics Inc. Switch User Manual

Auto Scan Interval

Sets the Auto Scan interval to “n” second intervals - where “n” is a number from 1 – 4.

[Left shift] [Right shift] [n]

Note: The “n” stands for the number of seconds that the focus dwells on a port before

switching to the other one. Replace the “n” with a number between 1 and 4 when

entering this hotkey combination. (See the table, below.)

Scan Interval Table

n Secs.

1 3 secs. (Default)

2 5 secs.

3 10 secs.

4 20 secs.