Instructions / Assembly

ASSEMBLY AND INSTALLATION INSTRUCTIONS for LR7
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 – 3/8” x 5/8” Button head screws
1 – 7/32” Allen wrench
4 – Hard Plastic floor glides
Components included:
2 – Upright body pieces
2 – Legs
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Slip the floor glides over the ends of the legs.
2) Place the two upright body pieces on top of and perpendicular to the legs. Using the Allen wrench and the four 3/8” x 5/8”
button head screws, attach the legs and the uprights together. The screws should be inserted from the top down toward the
floor. Tighten the screws only finger tight.
3) Square up your rack and tighten all the screws firmly.
4) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack.
Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a
"Pledge" like wax product.
It is important that your rack is assembled correctly. If the unit is assembled or used incorrectly, it
could become unstable and collapse, possibly causing injury.
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone [phone]  Fax [phone]
www.enclume.com
WARNING