Installation & Assembly

WALL RACKS (Utensil Bars)
OWR1, OWR2, OWR3
If you need assistance, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Enclosed you will find everything needed for the installation and use of your utensil bar. Two people make
installation easier.
Hardware included:
2 – 1 ½" Wood Screws
1 – Hex key
1 – Toggle Kit – ¼ x 20
Components included:
1 – Utensil Bar
12 – Essentials Straight Pot Hooks – 36” bar
8 – Essentials Straight Pot Hooks – 30” bar
6 – Essentials Straight Pot Hooks – 24” bar
INSTALLATION INSTRUCTIONS
1. Determine where you wish to mount your rack. Make sure you locate your wall studs if you want to mount into
solid wood. You will want to use a level (not included) to make sure that the rack is level. You may not be able
to mount both ends to a wall stud as they are typically spaced at 16". If it is not convenient to hang your rack
directly into a wall stud you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand
manufacturer recommendations for weight limits included in the instructions in the Toggler kit.
2. Hold the bar against the wall in its desired location, mark the mounting holes. If installing into solid wood, you
may want to pre-drill holes. Install the 1 1/2" wood screws directly into the wall studs through the holes on the
wall rack (or use the toggle instructions for drywall mount).
WARNING: It is important that your utensil bar is assembled correctly. If the unit is assembled or used incorrectly, it could become unstable
and collapse, possibly causing injury.
LIMITED WARRANTY: This product is warranted to be free of material defects, other than that from normal use, for a period of five years from
the date of purchase. Customer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the
following conditions: (1) notice of any defect is received by Enclume within the warranty period and (2) customer returns the defective product
to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following a return authorization number
(which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by Enclume. There are no
other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF
ENCLUME'S PRODUCTS
.