Installation & Assembly

Premier Reversible Arch Rack
PR37
If you need assistance, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Enclosed you will find everything needed for the assembly and use of your ceiling rack. Two people make assembly and installation
easier. The parts and hardware included are:
Hardware included:
2 – Ceiling Screw Hooks
2 – 2” 'S' Hooks
Toggle Kit
Components included:
1 – Rack Body
2 – Hanging Arms
12 – Straight Pot Hooks - WSPHS
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Place rack body on a firm surface.
2) Locate the hanging arms. Connect arms to the rack body by placing the ends under the appropriate cross bars as shown in the
picture.
3) Measure and mark the location for the two ceiling screw hooks on the ceiling to hold rack hanging arms.
4) The rack may be anchored into solid wood, (ceiling or roof joist, beam or backing that is designed to support the weight of your
rack along with your cookware) using the two ceiling screw hooks provided. If you decided to mount in plasterwall, use the
Toggles provided, and follow the directions in the Toggle kit.
5) Using the 'S' hooks provided hang the rack by hooking one end of the 'S' hook over the arm and the other end over the ceiling
screw hook that has been anchored securely into solid wood. Repeat process for other side.
6) If at any time you wish to reverse the rack, simply turn it over and repeat above. It is best to hang your pots on the crossbars to
prevent sliding.
WARNING: It is important that your ceiling rack is assembled correctly. If the unit is assembled or used incorrectly, it could become unstable and
collapse, possibly causing injury.
LIMITED WARRANTY: This product is warranted to be free of material defects, other than that from normal use, for a period of five years from the
date of purchase. Customer's exclusive remedy shall be the repair or replacement of the defective product and shall be subject to the following
conditions: (1) notice of any defect is received by Enclume within the warranty period and (2) customer returns the defective product to Enclume
Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20 days following a return authorization number (which may be
obtained by telephoning the number at the top of this instructions) being provided to the customer by Enclume. There are no other warranties,
expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY
DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.