Installation & Assembly

PR33-Scrolled Arm Oval Cookware Rack

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

6 – 3/8” x 1” Button Head Screws

6 –3/8” Nuts

2 – Ceiling Screw Hooks (Large)

2 – 5” Extension Hooks

1 – 7/32” Allen Wrench

12 – Angled Pot Hooks

12 – Straight Pot Hooks

2 – Grid Brackets

Toggle Kit

Components included:

1 – Oval Base

1 – Grid

4 – Arms

1 – Upper

4 – “L” shaped Grid Brackets

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

PAGE 1
PR33-Scrolled Arm Oval Cookware Rack Thank you for choosing Enclume! Enclume racks are the ultimate quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products 24 Colwell Street, Port Hadlock, WA 98339 Phone 360-385-6100  Fax 360-385-6156 www.enclume.com Enclosed you will find everything needed for the assembly and use of your storage rack.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS Rack Assembly 1) If your rack is stainless steel it is best to keep the tissue on during installation to avoid fingerprinting. 2) Place rack body (also called the oval) on the floor or other “firm” surface. 3) Attach the four arms to the OUTSIDE of the oval using the 3/8” x 1” button head screws. From the outside, thread the button head through the arms, the oval and grid bracket (long side down). Secure with 3/8” Hex nut. Make sure the arm orientation is correct.