Instructions / Assembly

DR14-Décor Cottage Circle Rack
Enclosed you will find everything needed for the assembly
and use of your pot rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 – Ceiling Screw Hooks (small)
6 – Straight Pot Hooks – EPHS
Toggler Kit
Components included:
1 – Circular Rack Body
2 – Hanging Arms
1 – Grid
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1) Lay the rack body on a flat surface.
2) Locate the holes in the rack body and insert the “U” shaped ends of each hanger from the outside of the rack body. The inside
ends of the hanger will now serve as your grid support.
3) Place the grid into the rack body on the hangers with the 4 full squares resting on each hanger.
4) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the
rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack
directly into wood joists you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand
manufacturer recommendations for weight limits included in the instructions in the Toggler kit.
5) As an alternative, if you desire two hanging points, you may locate and install both ceiling screw hooks or Togglers and place one
hanging arm on each.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Thank you for choosing Enclume!
Enclume racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone]  Fax [phone]
www.enclume.com