Installation & Assembly

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18009
1. Move the screen to its nal location and identify where the posts are located.
Attempt to push the unit into the ground as illustrated.
b (Optional)
2. If your ground is too hard, loosen the top 6" or 7" of the ground with a claw
hammer as illustrated.
3. Add water to loosened soil.
4. Use a block of wood to protect the top of the post and gently hammer the
post into the ground.
b Repeat Steps 2-4 in
order to assemble
the second screen.
3
2
STEP 5: ASSEMBLE THE SECOND SCREEN
STEP 6: INSTALLING THE SCREEN IN THE GROUND
STEP 5.1
STEP 6.1
1
Push down on the
top of the posts
with both hands
4