Installation & Assembly

www.encloscreens.com

ASSEMBLY INSTRUCTIONSEC18009

STEP 3: FASTEN POST ANCHORS

1. Insert (2) Post Anchors (F), into the posts until the pre-drilled holes

in the anchors and posts align.

2. Drive (4) 1" Stainless Steel Screws (I) into the pre-drilled holes in the

posts to secure the board and post anchors.

b Use (2) Wood Assembly

Spacers (B) to align the board

with the four pre-drilled post

holes. The spacers can be

removed after the height of the

bottom board is established.

STEP 3.1

STEP 3.2

Align

Preview

Flush