Instructions / Assembly

6
www.zippity-outdoor.com
S
TEP 4: COMPLETING THE COVER
STEP 4.1
1. Slide the boards into the slot in the second side frame (B), starting from the back of the boards. Continue sliding
the boards into the side frame until the side frame is touching the front frame.
2. Drive two 2.5” screws (G) into the pre-drilled holes in the second side frame piece.
B
G
1
2
STEP 4.2
Drive a 1” steel screw (F) into the side frame near the back board, roughly one inch from the large hole in the side
frame.
F
1 in