Instructions / Assembly

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS ZP19052
b 1. Slide the front top rail over the posts ensuring the picket holes in the front top rail are
facing down.
b 2. Guide the pickets into the front top rail and slide it down until the pre-drilled holes in the
front top rail align with the holes in the post.
b 3. Drive (4) ¾" self-drilling stainless steel screws into the aligned pre-drilled holes.
STEP 4: ASSEMBLE FULL PANEL
STEP 4.1
STEP 4.2
Align holes
1 2
3
b Repeat steps 2-4 using the Side Panel Top Rail (E) and Side Panel Bottom Rail (C) to assemble the
other two panels.