Instructions / Assembly

www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSZP19052
b 1. Take one of the front bottom rails and slide it up over the posts as illustrated. Make sure the
routed picket holes in the front bottom rails are facing up.
b 2. Align the pre-drilled holes in the posts and the front bottom rail.
b 3. Drive (4) ¾" Self-Drilling Stainless Steel Screws (J) into the pre-drilled holes on the front and back
of the front bottom rail.
STEP 3.1
STEP 3.2
STEP 3: ASSEMBLE FENCE PANEL
Align holes
21 3
J
b Insert the (8) Vertical Pickets (I) into the routed
picket holes in the front bottom rail.
I
Note: Vertical
pickets will have a
sticker labeled "2".