Instructions / Assembly

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS ZP19052
b 1. Insert (9) Horizontal Pickets (H) into the routed
holes in one of the posts.
b 2. Starting at one end of the opposite post, guide
the pickets into the routed holes in the post.
STEP 2: ASSEMBLE FULL PANEL
b Identify the Front Panel Top Rail (F) and the Front Panel Bottom Rail (D) as shown below.
Pressure t (2) loose Rail End Caps (B) into the ends of each rail. Set these rails aside for now.
STEP 2.1
STEP 2.2
D
STEP 2.3
H
2¾”
4¾”
Note: Identify the top
of the screen by nding
the side of the posts
with pre-drilled holes
2¾” from the end of the
posts.
4¾”
2¾”
b Take (2) Posts (G) and position them so the
routed holes face in towards each other as
shown.
G
F
B
1
2