Instructions / Assembly

www.encloscreens.com

ASSEMBLY INSTRUCTIONS ZP19036

b Align the pre-drilled holes in the top and middle

rails with the pre-drilled holes in the posts. Fasten

together using (8) ¾” Self-Drilling Stainless Steel

Screws (I).

STEP 2: ASSEMBLE SCREEN FRAME

b Identify the Top/Middle (C) and Bottom (F) Rails.

Fit the three loose Rail End Caps (D) into the ends of the rails.

STEP 2.1

STEP 2.2 STEP 2.3

b Position the two Posts (B) as illustrated, and slide

the top and middle rails down the posts, towards

the locking tabs.

Tip: Shine a ashlight down

the end of the posts to help

identify alignment of pre-

drilled holes.

This will be the top of the screen.

Align holes