Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY INSTRUCTIONS
ZP19014
STEP 2: ASSEMBLE FULL PANEL
STEP 2.1
(B) and Center Post (C)

(E)



(G).
E
B
C
Note: Factory installed
screws should be facing
inward.
Center post will have
four pre-drilled holes
at one corner and
two factory installed
screws at the boom.
Le post will have two
pre-drilled holes at one
corner and one factory
installed screw at the
boom.
Note: Make sure the
board is ght to the
back of the groove in the
post.
Top View.
Top View.
Top View.
STEP 2.2
Note: Make sure you install the 2½”
self-drilling stainless steel screws
straight through and not at an angle.
G
