Instructions / Assembly

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS ZP19008
STEP 2: ASSEMBLE SCREEN FRAME

two Posts (B) as
illustrated, and
slide the top and
middle rails down
over the posts
(towards the locking
tabs).
Align the pre-drilled holes in the
posts with the pre-dilled holes in the
top and middle rails. Fasten together
using (8) ¾" Self-Drilling Stainless
Steel Screws (I).
Guide (14) Pickets (C)
down through the top and
middle rails. Push down

pickets lock into place.
Note: Top and Boom Rails only have picket holes on one side.
Top of screen
Align holes
B
G
D
E
D
C
I
 (D) and
Middle Rails (E)
Rail End Caps (G) into the ends of each rail.
STEP 2.1
STEP 2.2
STEP 2.4
STEP 2.3