Instructions / Assembly

www.encloscreens.com
ASSEMBLY INSTRUCTIONS EC18014 / EC18015
11
1. Move the screen to its nal location.
2. Attempt to push the panel into the ground.
3. Ensure the unit is properly level in both directions as you push it into the ground.
STEP 5.2
1. Loosen the top 6" of the ground with a claw hammer.
2. Add water to loosened soil.
3. Use a block of wood to protect the post and gently
hammer each post into the ground.
2
1
STEP 5: INSTALL IN THE GROUND
STEP 5.1
3
NOTE: It is highly
recommended to use 2
people for this portion
of the installation.
If your panel cannot be pushed into the ground, follow
these steps: