Instructions / Assembly
www.encloscreens.com
6
ASSEMBLY INSTRUCTIONSEC18010 / EC18011
STEP 3: ASSEMBLE THE PANEL
STEP 3.1 STEP 3.2
C
D
1. Slide (2) Rails (C) into the routed holes in the
Left Post (D).
2. Slide (11) Slats (B) into the angled slots in
the left post.
1. Slide (1) Right Post (E) over the opposite
ends of the slats and rails. Ensure the rails
and slats are tight to the back of both posts
and that the unit is square before driving in
screws.
2. Drive (8) total ¾" Self-Drilling Stainless Steel
Screw (G) into the pre-drilled holes in the
posts.
B
2
1
2
1
E
G
1. Tip: Brace the left post against a wall or raised
at surface to allow for easier installation in
future steps.