Instructions / Assembly

www.encloscreens.com
8
ASSEMBLY INSTRUCTIONSEC18006 / EC18007
STEP 5: COMPLETING PLANTER BOX
STEP 5.1
1. Slide the second long
board into the post
channels. Ensure that this
board rests ush with the
other boards.
2. Drive (4) ⁄" black self-
drilling stainless steel
screws into the pre-
drilled holes in the posts.
1. Fit (3) Short Floor
Supports (J) so that the
notches t over the inner
walls of the long oor
supports as shown.
2. Place (1) Floor Board (C)
into the planter box, so it
rests on the oor supports.
STEP 5.2
2
2
1
1
Preview
Preview
Align
J
C
Ensure that
boards are ush
Note: For best plant growth, it is
recommended to drill (2) 3/4" diameter
drainage holes in the oor board roughly 12"
apart.