Instructions / Assembly

www.encloscreens.com

ASSEMBLY INSTRUCTIONSEC18006 / EC18007

STEP 3: ASSEMBLING THE PLANTER BOX

1. Slide (1) long board into the post channels, ensuring that the tabs on

the posts align with the grooves in the board.

2. Drive (4) ⁄" black self-drilling stainless steel screws (M) into the pre-

drilled holes in the posts, securing the long board.

b Orient (2) Short Posts (K) as

shown, with two post channels

facing each other, and two

channels facing front.

STEP 3.1

STEP 3.2

Preview

Note: Ensure tabs on

posts and notches on

boards align.

Top View

Note: Ensure the bottom of the board is ush to the bottom of the posts.

Tabs Tabs

1. (E)