Instructions / Assembly

www.encloscreens.com
5
ASSEMBLY INSTRUCTIONS EC18006 / EC18007
STEP 2: ASSEMBLING BOARDS
STEP 2.1
1. Lay down (1) Long Board (A) so that the
cut grooves face up as shown.
2. Place (1) Long Floor Support (D) at the
bottom of the long board.
3. Position the long oor support so it
rests in the middle of the long board.
1. Drive (4) 1½" Black Self-Drilling
Stainless Steel Screws (L) into the pre-
drilled holes in the long oor support.
2. Repeat these steps for the second long
board.
STEP 2.2
2
3
2
1
1
A
D
L
7 ¼ in
7 ¼ in
Ensure that the bottom of
the long board and long
oor support are ush
Ensure oor support is
placed on the grooved
edge face of the board.