Instructions / Assembly
www.encloscreens.com
ASSEMBLY INSTRUCTIONSEC18003 / EC18004
8
b STEPS 5.2 and 5.3 are only needed if your ground is
too hard for STEP 5.1.
1. Loosen the top 6" of the ground with a claw
hammer.
2. Add water to loosened soil.
3. Use a block of wood to protect the post and
gently hammer each post into the ground.
1. If your ground is very hard, dig a hole 8" in diameter and 10" deep, large
enough to accommodate one post from each panel.
2. Level the screen, backll excavated dirt, and tamp as needed.
STEP 5.2
STEP 5.3
2
1
3
1 2