Instructions / Assembly

www.encloscreens.com

ASSEMBLY INSTRUCTIONSEC18003 / EC18004

1. Slide (1) Bottom Rail (H) up over the posts until the pre-

drilled holes align with the top holes of the post bottom as

shown below.

2. Keeping the holes aligned, take (1) Post Anchor - Right (F)

and (1) Post Anchor - Left (E) and slide them until the pre-

drilled holes align with the lowest holes on the posts.

3. Drive (4) ¾" screws into the aligned pre-drilled holes.

STEP 3.2

Preview

1 2

Align Align