Instructions / Assembly

www.encloscreens.com
7
ASSEMBLY INSTRUCTIONS EC18001 / EC18002
1. Move the screen to its nal location and identify where the posts are located.
Attempt to push the unit into the ground as illustrated.
2. If your ground is too hard, loosen the top 6" or 7" of the ground with a claw
hammer as illustrated.
3. Add water to loosened soil.
4. Use a block of wood to protect the top of the post and gently hammer the
post into the ground.
b Repeat Steps 2-3 in
order to assemble
the second screen.
3
2
STEP 4: ASSEMBLE THE SECOND SCREEN
STEP 5: INSTALLING THE SCREEN IN THE GROUND
STEP 4.1
STEP 5.1
1
Push down on the
top of the posts
with both hands
4