Datasheet

288
Encitech AB
Rörkullsvägen 4 Tel: [phone]
SE-302 41 HALMSTAD, Sweden e-mail: [e-mail]
www.encitech.com
www.encitech.com
TECHNICAL SPECIFICATIONS
Full Metal Hoods DCMR-ULP + D-Sub Solder Cup Male
D-Sub Hood:
Material: Zinc, Nickel Plated
Operating Temperature: -25°C to +90°C
Cable Entry: 90° Side Entry
Jackscrews: UNC 4-40, M3 on request
Cable O.D: 9-way: Up to 8,1mm
15-way: Up to 8,1mm
25-way: Up to 11,4mm
37-way: Up to 16,5mm
50-way: Up to 16,5mm
Type of grommets: Compression Inserts
Male D-Sub Solder Cup:
Insulator: PBT, Black, UL94 V-0
Shell: Steel, Tin Plated
Contact pins: Copper Alloy
Stamped & Formed Pins Class 3, 100 inserts min.
Machined Contact Pins: Class 1, 500 inserts min.
Contact Plating: Selective Gold over Nickel
Operating Temperature: -55°C to +105°C
Withstanding voltage: 1000V for 1 minute
Insulator resistance: 1000MΩ min.
Features:
●
Available in sizes 9-15-25
Other sizes on request
● Suitable for any common Sub-D connector
● Re-Openable
Size A B C D E F G
9 15,0 31,0 15,0 24,4 50,8 18,0 26,5
15 15,3 39,2 15,0 24,0 59,0 18,0 26,5
25 16,0 54,0 23,0 34,5 73,0 24,5 37,0
Ordering information - Black Insulator:
Ordering information - White Insulator:
Size: P/N - Kitted: Class 3 - 100 inserts min.
Size: P/N - Kitted: Class 1 - 500 inserts min.
9-way 6355-0099-01 DCMR09-ULP-DBP-K
15-way 6355-0099-02 DCMR15-ULP-DBP-K
25-way 6355-0099-03 DCMR25-ULP-DBP-K
9-way 6355-0099-21 DCMR09-ULP-DMP-K
15-way 6355-0099-22 DCMR15-ULP-DMP-K
25-way 6355-0099-23 DCMR25-ULP-DMP-K
Size: P/N - Kitted: Class 3 - 100 inserts min.
Size: P/N - Kitted: Class 1 - 500 inserts min.
9-way 6355-8099-01 DCMR09-ULP-DBP-W-K
15-way 6355-8099-02 DCMR15-ULP-DBP-W-K
25-way 6355-8099-03 DCMR25-ULP-DBP-W-K
9-way 6355-8099-21 DCMR09-ULP-DMP-W-K
15-way 6355-8099-22 DCMR15-ULP-DMP-W-K
25-way 6355-8099-23 DCMR25-ULP-DMP-W-K