Installation Instructions

Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging. Two people may be required for assembly.
Components:
 Birdbath Mosaic Plate
 Birdbath Base Stand
 Circle Frame
 Screws
Assembly Instructions
1. Place Metal Stand on a leveled surface
2. Open Base Stand on a way that an X is formed in the middle of the
stand. See diagram below
3. Take the Circle Frame and place it on the top of the Base Stand,
aligning the Circle Frame holes to the hole on the Base Stand. See
diagram below.
4. Place one screw on each side of the Metal Stand. Make sure that
the screws are tight enough to support the weight of Mosaic Plate.
5. Place the Mosaic Plate on the top of the Metal Stand
6. Add water on the Mosaic Plate.