Assembly Instructions

5
1. Unplug the product from power.
2. Remove all ornaments and decorations.
3. Disassemble the tree from the top to the bottom. Lift the Tree Top gently straight up to remove from the section below and
fold all branches towards the pole. Continue until Section 1 is removed from the stand.
4. Close all the protective caps tightly (see Fig. D).
5. Carefully place all the tree sections into the included tree bag (if any) within the packaging
box(es) and tape the box(es) shut.
6. Store the box(es) in a cool, dry place away from direct sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
7. Keep out of reach of pets and children.
If you don’t know what to say to Alexa after setup is completed, you can call HELP to get into Help mode.
The dialogue is listed below:
Alexa: Thank you for choosing Polygroup Smart Tree. I take 9 commands, they are:
1. ON; 2. OFF; 3. Fade White; 4. White; 5. Color Change; 6. Multi-color; 7. Fade Multi-color; 8. Blink White, and 9. Blink Multi-color.
What would you like me to do?
STORAGE INSTRUCTIONS
HELP MODE
There may be instances where Alexa doesn’t understand your commands.
The dialogue is listed below:
Alexa: I’m not sure I understand. I take 9 commands, they are:
1. ON; 2. OFF; 3. Fade White; 4. White; 5. Color Change; 6. Multi-color; 7. Fade Multi-color; 8. Blink White, and 9. Blink Multi-color.
What would you like me to do?
ERROR MODE
Fig. DFig. D
Function
Change lights to White
Change lights to Fade White
Change lights to Blink White
Change lights to Multi-color
Change lights to Fade Multi-color
Change lights to Blink Multi-color
Change lights to Color Change
Turn OFF the lights
Turn ON the lights
Command
“Alexa, tell Smart Tree, White.”
“Alexa, tell Smart Tree, Fade White.”
“Alexa, tell Smart Tree, Blink White.”
“Alexa, tell Smart Tree, Multi-color.”
“Alexa, tell Smart Tree, Fade Multi-color.”
“Alexa, tell Smart Tree, Blink Multi-color.”
“Alexa, tell Smart Tree, Color Change.”
“Alexa, tell Smart Tree, Off.”
“Alexa, tell Smart Tree, On.”
Once finished, enjoy the tree lights by giving the below voice commands:
You can also change the light effects by pressing the button on the Light Controller (see Fig. B).
Button
CAUTION:
1. To reduce the risk of fire and electric shock:
a) Do not install on trees with needles, leaves or branches covering any metal materials,
b) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or
electrical shock hazards.