Assembly Instructions

Page 2 of 2
USER SERVICING INSTRUCTIONS:
BULB REPLACEMENT INSTRUCTIONS:
Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment
plug is damaged.
1. Make sure the light string is unplugged.
2. Remove plugs from the receptacle or other outlet device. Do not
unplug by pulling the cord.
3. Allow bulb to cool. To remove bulb, pull bulb out of socket.
CAUTION: To reduce the risk of overheating, replace burned out lamps promptly. Use 3.5volt
0.42watt lamps only.
FUSE REPLACEMENT INSTRUCTIONS FOR EACH LIGHT STRING:
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be
removed. Discard product if the attachment
plug is damaged.
1. Unplug product from the receptacle or
other outlet device. Do not unplug by pulling
on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug toward blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse with 3 Amp, 125 Volt fuse (provided with this product).
5. Close fuse cover: slide closed the fuse access cover on top of attachment plug.
TROUBLESHOOTING:
If your tree does not light up, please check the following.
1. Check that all plugs are properly connected.
2. Check fuse in extension cord plug. If the fuse is burned out, please replace it with spare fuse
enclosed.
3. Check wall outlet for power.
4. Check for loose, missing, or broken bulbs.
CONTACTING CUSTOMER SERVICE:
If you have any queries about the product, you can call the free number for solution.
FOR CUSTOMER SERVICE CALL: 1-800-311-3324
Business Hours: Monday - Friday - 9:30 am - 4:00 pm EST