Assembly Instructions

6. Inset the bottom section（ Section C）of the tree to the tree stand.
7. Remove the bubble wrap and allow the hinged branches to unfold into place. Make sure all wiring
is free from the branch hinges. Shape the branches on the bottom section of your tree.
8. Insert the middle section ( Section B) of the tree
into the bottom section. Remove the bubble wrap
to allow the hinged branches to unfold into place.
Make sure all wiring is free from the branch hinges.
9. Insert the tree top (Section A). Remove the bubble
wrap and cord in order to shape the branches.
10. Shape the whole tree for a natural look.
11. Connect the light set to the transformer provided
with the product. Connect the transformer to
standard outlet. You are provided a remote control
to choose the LED lights function: You can choose
following function styles by pushing the buttons on
the panel of the remote control
Bulb Replacement Instruction:
If a bulb is blown, please replace the faulty bulb by
following the below steps in diagram.
There are spare bulbs included for replacement.
Care & Use:
1. Before using or re-
using, please
inspect the product
carefully. Do not
use any products that have cut, damaged or frayed wire insulation or cords, cracks in the lamp
holders, loose connections or exposed copper wire.
2. Before storing the product, please carefully remove the product from wherever it is placed to
avoid undue strain or stress on the product conductors, connections and wires.
Storage:
Carefully repack the tree in its box. STORE THE PRODUCT IN A COOL AND DRY LOCATION
PROTECTED FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40˚C.
Trouble shooting:
If the product does not work properly, check these connections:
1. Make sure that the light string plugs are securely plugged.
2. Make sure the plug of the transformer is connected to the power supply.
If none of the above steps corrects your problem, please contact the Customer Service
Department at Puleo International, Inc. :
CUSTOMER SERVICE CALL: [phone]
EMAIL ADDRESS : [e-mail]
Business Hours: Monday - Friday - 9:30 am - 4:00 pm EST
Adaptor