Assembly Instructions

Page 2 of 2
Stand tree up and straighten by adjusting screws in or out then tighten screws.
2. Assembly the tree according to following diagram.
3. Connect light strings according to following diagram.
4. Shape the leaves to a natural look according
following diagram. Now you can plug the
extension cord to perform the tree for
decoration.
USE AND CARE INSTRUCTIONS:
Before using or reusing, inspect product carefully.
Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders, loose connections, or exposed copper wire. Before storing the product, carefully
remove the product from wherever it is placed to avoid any undue strain or stress on the product
conductors, connections, and wires. When not in use, store neatly in a cool, dry location protected
from sunlight.
USER SERVICING INSTRUCTIONS:
BULB REPLACEMENT INSTRUCTIONS:
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is
damaged.
1. Make sure the light string is unplugged.
2. Remove plugs from the receptacle or other outlet device. Do not unplug by pulling the cord.
3. Allow bulb to cool. To remove bulb, pull bulb out of socket.
CAUTION: To reduce the risk of overheating, replace burned out lamps promptly. Use
2.5volt0.425watt lamps only.
FUSE REPLACEMENT INSTRUCTIONS FOR EACH LIGHT STRING:
Risk of fire. Do not replace attachment plug.
Contains a safety device (fuse) that should not
be removed. Discard product if the attachment
plug is damaged.
1. Unplug product from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug toward blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse with 3 Amp, 125 Volt fuse (provided with this product).
5. Close fuse cover: slide closed the fuse access cover on top of attachment plug.
TROUBLESHOOTING:
If your tree does not light up, please check the following.
1. Check that all plugs are properly connected.
2. Check fuse in extension cord plug. If the fuse is burned out, please replace it with spare fuse
enclosed.
3. Check wall outlet for power.
4. Check for loose, missing, or broken bulbs.
CONTACTING CUSTOMER SERVICE:
If you have any queries about the product, you can call the free number for solution.
FOR CUSTOMER SERVICE CALL: 1-800-311-3324
Business Hours: Monday - Friday - 9:30 am - 4:00 pm EST